|
Recent
Publication:
|
-
Karim, M. M., Mostafa, N. and Sarker, M. M. A.,2009: Numerical Prediction of Unsteady Cavitating Flow around a Hydrofoil, 16th Mathematics Conference
of Bangladesh Mathematical Society, 17 - 19 December.
-
Hasan, M. K., Karim, M. M. and Khan, M. A. H.,2009: Effects of Hub Taper Angle and Pod-Strut Geometry on Hydrodynamic Characteristics of Podded Propulsors, 16th Mathematics Conference
of Bangladesh Mathematical Society, 17 - 19 December,
-
Karim, M. M., Iqbal, K. S., Khondoker, M. R. H. and Rahman, S. M. H. , 2009: NUMERICAL INVESTGATION INTO THE EFFECT OF LAUNCH SKID ANGLE ON THE BEHAVIOUR OF FREE-FALL LIFEBOAT IN REGULAR WAVES, International Journal of Small Craft Technology, The Transaction of The Royal Institute of Naval Architects (RINA), UK, Vol 151, Part B1.
-
Karim, M. M., Iqbal, K. S., Khondoker, M. R. H. and Rahman, S. M. H. , 2009: INFLUENCE OF FALLING HEIGHT ON THE BEHAVIOR OF SKID-LAUNCHING FREE-FALL LIFEBOAT IN REGULAR WAVES, Accepted for publication in the Journal of Applied Fluid Mechanics [Accepted for inclusion in the index of Scopus]
-
Karim, M. M., Rahman, M. M., and Alim, M. A., 2009: Computation of Turbulent Viscous Flow around Submarine Hull Using Unstructured Grid, Journal of Ship Technology, Institute of Naval Architects, India. (http://www.jstindia.org), ISSN: 0973-1423.
-
Karim, M. M., 2009: A Micro-Genetic Algorithm Based Optimization of Marine Propeller for Podded Propulsion System, Accepted for publication in the Journal of Ocean and Ship Technology, IIT, Kharagpur, India.
-
Karim, M. M., Rahman, M. M., and Alim, M. A., 2009: Computation of Axisymmetric Turbulent Viscous Flow Around Sphere, Journal of Scientific Research, Vol. 1, No. 2, pp 209-219. (http://www.banglajol.info/index.php/JSR), ISSN: 2070-0237(Print); ISSN 2070-0245 (Online).
-
Karim, M. M., Rahman, M. M., and Alim, M. A., 2008: Numerical Computation of Viscous Drag for Axisymmetric Underwater Vehicles, Jurnal Mekanikal, Faculty of Mechanical Engineering, UTM, Malaysia, No. 26, pp. 9-21. ISSN: 0127-3396.
(also available on https://www.fkm.utm.my/~mekanika/journal.html)
-
Karim, M. M., Ali, M. A. and Iqbal, K. S., 2008: Influence of Curve Fitting Techniques on Hydrostatic Characteristics of Ship, Journal of Mechanical Engineering, Transaction of the Mechanical Engineering Division, The Institution of Engineers, Bangladesh, Vol. 39, No.2, pp. 100-112, ISSN: 0379-4318. (available on http://www.banglajol.info/index.php/JME)
-
Iqbal, K. S., Bulian, G., Hasegawa, K., Karim, M. M. and Awal, Z. I.: 2008: A Rational Analysis of Intact Stability Hazards Involving Small Inland Passenger Ferries in Bangladesh, Journal of Marine Science and Technology, Springer, Vol. 13, No. 3, pp. 270-281, 0948-4280 (Print); 1437-8213 (Online), doi:10.1007/s00773-008-0016-3.
(http://www.springerlink.com/content/103810/)
-
Iqbal, K. S., Bulian, G., Hasegawa, K., Karim, M. M. and Awal, Z. I., 2008: Possible Remedies for Intact Stability Hazards Involving Contemporary Small Inland Passenger Ferries in Bangladesh, Journal of Marine Science and Technology, Springer, Vol.13, No. 3, pp. 282-290, 0948-4280 (Print); 1437-8213 (Online), doi:10.1007/s00773-008-0023-4. (http://www.springerlink.com/content/103810/)
-
Alim, M. A., Rahman, M. M. and Karim, M. M., 2008: Separation Points of Magneto-hydrodynamic Boundary Layer Flow along a Vertical Plate with Exponentially Decreasing Free Stream Velocity, Journal of Naval Architecture and Marine Engineering, Bangladesh, Vol. 4, No.1, pp. 11-18, ISSN: 1813-8535 (Print), ISSN 2070-8998 (Online) (http://www.banglajol.info/index.php/JNAME).
-
Rahman, M. M., Karim, M. M. and Alim, M. A., 2007: Numerical Investigation of Unsteady Flow Past a Circular Cylinder Using 2-D Finite Volume Method, Journal of Naval Architecture and Marine Engineering, Bangladesh, Vol. 4, No.1, pp. 27-42, ISSN 1813-8535 (Print), ISSN 2070-8998 (Online), (http://www.banglajol.info/index.php/JNAME).
-
Karim, M. M., Khan, A. H. and Hasan, M. M. 2006: A Study of Surface Panel Method for the Analysis of Marine Propeller in Steady Flow, Journal of the Institution of Engineers, Bangladesh, Mechanical Engineering Division, Vol. ME 35, pp. 42-54, ISSN: 0379-4318.
|
|
| | | | | | | | | | | | | |
|
